High Temperature Disperse Ink products are a common type of ink. It has the advantages of high temperature and good printing effect, but there are also some precautions that we need to pay special attention to when using them.

First of all, when using High Temperature Disperse Ink products, you need to pay attention to the temperature control. If the temperature is too high, the fluidity of the ink will deteriorate, which will affect the printing effect; if the temperature is too low, the adhesion of the ink will decrease, and poor printing quality will easily occur. Generally speaking, the operating temperature of High Temperature Disperse Ink products should be between 60°C and 70°C, which should be adjusted according to specific production equipment and environmental conditions.

Secondly, special attention is also required when adding additives. High Temperature Disperse Ink products usually add some additives, such as dispersant, thickener and so on. If too much is added, the viscosity of the ink will increase, causing problems such as poor printing or deinking. Therefore, when using additives, it is necessary to master the appropriate addition ratio and avoid adding too much.

In addition, you need to pay attention to the stability of High Temperature Disperse Ink products. High Temperature Disperse Ink products may be subject to change due to climate change and time. If no stabilizer is added, the stability of the ink will decrease, and problems such as uneven color and unstable quality will easily occur during use. Therefore, it is necessary to add a stabilizer in the production process to ensure the stability of the ink.

Finally, care should be taken with the storage and transportation of High Temperature Disperse Ink products. High Temperature Disperse Ink products should be protected from harsh environments such as direct sunlight and humidity during storage and transportation. At the same time, pay attention to the storage period. Generally, High Temperature Disperse Ink products should not be stored for too long at room temperature, otherwise their quality may decline.

In short, High Temperature Disperse Ink products are a commonly used type of ink. We need to master the relevant precautions when using them to avoid problems that affect the printing effect and quality. Only by strictly controlling the heating temperature, adding additives and stabilizers in an appropriate amount, and properly storing and transporting, can High Temperature Disperse Ink products give full play to its advantages in the production process and ensure the quality and efficiency of printed products.